RIGGING MADE TO CUSTOMER-SPECIFIED LENGTHS.
We can supply replacement rigging to exact customer specifications - but please follow the instructions on this page to provide us with the correct data to make your new rigging.
For each rigging item, we need to know the wire type and diameter, the overall length (see drawing below), and the rigging screw pin diameter. Measure lengths with the rigging screws set up as on the boat. We will supply replacement rigging to that length, with the rigging screws two-thirds open.
Please print off this page, fill in the data required in the table below, and send it to us for a free quotation.
RIGGING TYPE (eg, 1x19, Dyneema):_________________________________